“Brilliant service, my car is running better than ever with no pesky adblue issues. Would highly recommend”
Turtle
Seeing an AdBlue system fault or a restart countdown on your Jaguar F-Pace dashboard can be incredibly stressful. Our specialist mobile service is designed to resolve these issues by applying a software-only AdBlue delete at your home or workplace. For a confirmed quote and to check availability, please provide your vehicle registration and postcode.
We come to your home, workplace or another agreed safe location, subject to availability.
A mobile appointment that fits around your day, with a vehicle suitability check and a quotation before you book.

Experienced technicians providing dedicated AdBlue software services for diesel cars and vans.
We come directly to your home or workplace at an agreed time that suits you.
Convenient mobile appointments throughout the week, subject to availability.
Dedicated AdBlue software services, with your vehicle checked before booking.
Confidence in our work, backed by our lifetime AdBlue software warranty.
If we cannot successfully complete the agreed service, our No Fix, No Fee policy applies.
From helpful advice to professional automotive services, genuine customer feedback says more than any sales pitch. Take a look at the experiences shared by customers and see why so many drivers put their trust in experienced automotive specialists.
Common AdBlue warnings
This is the most critical warning, counting down the miles until your F-Pace refuses to start. It is typically triggered by the ECU detecting a fault anywhere in the SCR system that has not been rectified.
A general warning message indicating the vehicle has detected a problem with the AdBlue system. This can be caused by anything from a sensor failure to an issue with the injector or pump.
This message can appear even if you have used the correct AdBlue fluid from a sealed container. It often points to a problem with the sensitive NOx sensors misreading the exhaust gas composition.
To prevent further emissions system damage, the vehicle may enter a reduced power mode, known as 'limp mode'. This is a clear sign the AdBlue system requires urgent attention to restore normal vehicle operation.
The AdBlue tank contains sensors and a heater element that can fail over time, especially in colder weather. A failure in these components will trigger a system fault and a dashboard warning light.
Your F-Pace has NOx sensors before and after the SCR catalyst to measure system efficiency. If one of these sensors fails or provides incorrect readings, it will cause an AdBlue system error and a warning.
AdBlue Delete & Removal
Upon arrival, our technician will first perform a full diagnostic scan to confirm the source of the AdBlue system fault. We then connect directly to your F-Pace's Engine Control Unit (ECU) to apply our specialist software solution. This AdBlue delete, also known as AdBlue removal, digitally deactivates the system, preventing future warnings and countdowns. Some newer models feature protected ECUs that may require unlocking at an additional cost, which we confirm before starting any work. We can perform this service at your home or place of work for maximum convenience, and can also quote for optional performance or economy remaps subject to suitability.
Vehicle suitability
Does my Jaguar F-Pace have AdBlue? The system, which Jaguar calls Diesel Exhaust Fluid (DEF), is fitted to many, but not all, diesel versions. For your Jaguar F-Pace, we check the registration, engine, build specification and ECU details rather than assuming fitment or service support from its age or badge. However, fitment varies depending on the specific model year and original emissions specification. The only certain way to know is for us to check your vehicle's details; we use your registration number to confirm compatibility before booking.
Found a fault code during a diagnostic scan? Enter it below to understand what it could mean, what warning signs to look out for and what information our mobile AdBlue specialists need to help you.
From AdBlue pressure faults to NOx sensor warnings and SCR system problems, explore common diagnostic codes in simple English.
These are shared diagnostic codes, not confirmed faults for every Jaguar F-Pace. Applicability depends on your vehicle and scan results.
8 common codes
Fault name
What it means
The system has reported insufficient reductant pressure. Diagnostic checks help establish the cause, rather than assuming a failed pump.
VIEW FAULT DETAILSFault name
What it means
SCR NOx reduction efficiency has been reported below its expected threshold. The full scan and sensor readings help identify possible causes.
VIEW FAULT DETAILSFault name
What it means
The code concerns SCR operation or monitoring. Read it alongside the full scan and vehicle-specific information.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a dosing or aftertreatment injector. Check the fitted system and full scan before assuming a cause.
VIEW FAULT DETAILSFault name
What it means
The system reports that the reductant level is too low. Check the actual fluid level and whether the reported level is accurate.
VIEW FAULT DETAILSFault name
What it means
The system has reported reductant quality performance. The code alone does not identify the cause.
VIEW FAULT DETAILSSend us your registration, postcode and diagnostic fault code. We'll check the details and explain the available mobile service options.
We cover much of Southern England and other supported areas across England. Enter your postcode, or browse our areas.
Tell us the registration, your postcode and what the dashboard shows.
We confirm suitability for your model and agree a quotation before any work.
Choose a time and a safe place to work, at home or at work, subject to availability.
The agreed software work is carried out at your location and checked before we leave.
This often happens when the system has a fault. Even with a full tank, a failed sensor, pump, or heater will prevent the system from resetting the warning light, often leading to a no start countdown.
Yes, our AdBlue delete software solution is designed to resolve this issue. By deactivating the system within the ECU software, the countdown commands are removed.
Whether unlocking is needed depends on your Jaguar F-Pace's specific ECU hardware and software. Some supported protected ECUs need specialist unlocking, which costs extra and is confirmed before booking; the vehicle's age alone does not establish this.
The engine badge or model year alone does not confirm AdBlue fitment or software support for your Jaguar F-Pace. Send your registration so we can check the engine, emissions specification and ECU details before confirming suitability and a quote.
Yes. NOx sensors and the SCR catalyst are integral parts of the AdBlue system. Our software solution deactivates the system's reliance on these components, which can resolve the associated warnings.
We understand completely. Our service is mobile, so we come to you at home or work to minimise disruption. We aim to get you back on the road the same day, subject to technician availability.
For most F-Pace models, the process typically takes between one to two hours from arrival. More complex jobs, such as those requiring an ECU unlock, may take longer, but we will advise you of this beforehand.
Our mobile team covers London, much of Southern England and additional supported locations. Send us your postcode to confirm availability. We offer a same-day or next-day service subject to technician availability.
The price depends on your vehicle's specific ECU type and location. For an accurate, no-obligation quote, please provide your registration number and postcode.
Yes, they are just two different names for the exact same service. It is a purely software-based modification to the engine's computer; no parts are physically removed from the vehicle.
Yes. Our standard hours are Monday to Sunday, 8 AM to 8 PM. Emergency callouts are available 24 hours a day, 7 days a week, subject to location and availability. An additional emergency callout charge applies and is confirmed before dispatch.
Enter your registration, postcode and mobile number. We'll check your vehicle and reply with a quotation. You can add a photo of your dashboard warning in the WhatsApp chat.
Call or WhatsApp with the warning, miles remaining and where the vehicle is. Emergency callouts carry an additional charge, confirmed before dispatch.
Related pages