“Brilliant service, my car is running better than ever with no pesky adblue issues. Would highly recommend”
Turtle
A dashboard warning on your Jaguar E-Pace can quickly escalate into a stressful non-start countdown. If you are facing AdBlue system faults, you need a specialist solution that works around you. AdBlue Solutions offers a fully mobile service, bringing experienced technicians directly to your location. For a quote, simply provide your vehicle registration and postcode.
We come to your home, workplace or another agreed safe location, subject to availability.
Is this on your dashboard?
A mobile appointment that fits around your day, with a vehicle suitability check and a quotation before you book.

Experienced technicians providing dedicated AdBlue software services for diesel cars and vans.
We come directly to your home or workplace at an agreed time that suits you.
Convenient mobile appointments throughout the week, subject to availability.
Dedicated AdBlue software services, with your vehicle checked before booking.
Confidence in our work, backed by our lifetime AdBlue software warranty.
If we cannot successfully complete the agreed service, our No Fix, No Fee policy applies.
From helpful advice to professional automotive services, genuine customer feedback says more than any sales pitch. Take a look at the experiences shared by customers and see why so many drivers put their trust in experienced automotive specialists.
Common AdBlue warnings
This is the most urgent warning, counting down the miles until your E-Pace refuses to restart. It is typically triggered by the ECU detecting a critical fault anywhere within the SCR and AdBlue system.
A generic but serious message indicating the vehicle has detected a problem with the AdBlue system. This can be caused by anything from a sensor failure to a problem with the injector or pump module.
The system believes the fluid in the tank is contaminated or of poor quality, often due to a faulty quality sensor. Even if you have used the correct fluid, the sensor itself can fail and trigger this warning.
You have refilled the AdBlue tank, but the warning light and message persist on the dashboard. This often points to a faulty level sensor inside the tank assembly which has failed to register the new fluid level.
The vehicle's nitrogen oxide sensors are a key part of the emissions system, and their failure can trigger AdBlue warnings. The ECU relies on these sensors to monitor system performance.
The EML may illuminate alongside a specific AdBlue message. This indicates that a fault code related to the emissions control system has been stored in the engine's control unit.
AdBlue Delete & Removal
Our process begins with a full diagnostic scan to confirm the fault lies within the AdBlue SCR system. Once confirmed, we perform an AdBlue delete, which is a purely software-based solution. We take a read of your E-Pace's engine control unit (ECU) data and expertly modify it to disable the AdBlue system's function, preventing future warnings. Some newer models feature protected ECUs that require specialist unlocking; this is confirmed upfront and quoted accordingly. Subject to vehicle suitability, we can also provide optional performance or economy remaps. All work is carried out conveniently at your home or workplace.
Vehicle suitability
Does my Jaguar E-Pace have AdBlue? It's a common question, as not every diesel version was fitted with it. For your Jaguar E-Pace, we check the registration, engine, build specification and ECU details rather than assuming fitment or service support from its age or badge. However, fitment always depends on the exact model year and emissions specification. The only certain way to know is to check, which we do using your vehicle's registration before confirming any booking.
Found a fault code during a diagnostic scan? Enter it below to understand what it could mean, what warning signs to look out for and what information our mobile AdBlue specialists need to help you.
From AdBlue pressure faults to NOx sensor warnings and SCR system problems, explore common diagnostic codes in simple English.
These are shared diagnostic codes, not confirmed faults for every Jaguar E-Pace. Applicability depends on your vehicle and scan results.
8 common codes
Fault name
What it means
The system has reported insufficient reductant pressure. Diagnostic checks help establish the cause, rather than assuming a failed pump.
VIEW FAULT DETAILSFault name
What it means
SCR NOx reduction efficiency has been reported below its expected threshold. The full scan and sensor readings help identify possible causes.
VIEW FAULT DETAILSFault name
What it means
The code concerns SCR operation or monitoring. Read it alongside the full scan and vehicle-specific information.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a dosing or aftertreatment injector. Check the fitted system and full scan before assuming a cause.
VIEW FAULT DETAILSFault name
What it means
The system reports that the reductant level is too low. Check the actual fluid level and whether the reported level is accurate.
VIEW FAULT DETAILSFault name
What it means
The system has reported reductant quality performance. The code alone does not identify the cause.
VIEW FAULT DETAILSSend us your registration, postcode and diagnostic fault code. We'll check the details and explain the available mobile service options.
We cover much of Southern England and other supported areas across England. Enter your postcode, or browse our areas.
Tell us the registration, your postcode and what the dashboard shows.
We confirm suitability for your model and agree a quotation before any work.
Choose a time and a safe place to work, at home or at work, subject to availability.
The agreed software work is carried out at your location and checked before we leave.
This is a very common scenario. It usually indicates a failed sensor in the AdBlue tank that cannot detect the new fluid level, or another system fault that is preventing the warning from resetting.
This is a warning programmed by Jaguar to enforce emissions compliance. When a serious AdBlue fault is detected, the vehicle will prevent you from restarting it after the countdown expires. Our software solution is designed to prevent this from happening.
Whether unlocking is needed depends on your Jaguar E-Pace's specific ECU hardware and software. Some supported protected ECUs need specialist unlocking, which costs extra and is confirmed before booking; the vehicle's age alone does not establish this.
The engine badge or model year alone does not confirm AdBlue fitment or software support for your Jaguar E-Pace. Send your registration so we can check the engine, emissions specification and ECU details before confirming suitability and a quote.
SCR (Selective Catalytic Reduction) and NOx (Nitrogen Oxide) faults relate directly to the AdBlue system. The SCR catalyst uses AdBlue to reduce NOx emissions, so a fault with either will trigger dashboard warnings.
Absolutely. We understand that reliability is paramount for a family vehicle. Our mobile service is designed to be as convenient as possible, resolving the issue at your home so you can get back on the road with confidence.
A typical AdBlue software removal takes between 1 to 2 hours. If the ECU requires unlocking, the process can take longer, but we will always advise you of the estimated timescale beforehand.
Our mobile team covers London, much of Southern England and additional supported locations. Send us your postcode to confirm availability. Provide your postcode when you enquire for confirmation.
The price depends on the vehicle's year, engine, and specific ECU type. For an accurate, no-obligation quote, please provide your registration and postcode.
No, they are two different names for the exact same service. Whether you call it an AdBlue Delete or AdBlue Removal, the process involves a software modification to the ECU to disable the system.
Yes. Our standard hours are Monday to Sunday, 8 AM to 8 PM. Emergency callouts are available 24 hours a day, 7 days a week, subject to location and availability. An additional emergency callout charge applies and is confirmed before dispatch.
Enter your registration, postcode and mobile number. We'll check your vehicle and reply with a quotation. You can add a photo of your dashboard warning in the WhatsApp chat.
Call or WhatsApp with the warning, miles remaining and where the vehicle is. Emergency callouts carry an additional charge, confirmed before dispatch.
Related pages