“Brilliant service, my car is running better than ever with no pesky adblue issues. Would highly recommend”
Turtle
AdBlue Delete and Removal enquiries in Hampshire start with checking your vehicle and symptoms. Send your registration, full postcode and dashboard warning to discuss the available options and whether a mobile visit to your home or workplace is suitable.
24/7 Emergency Callouts Available
Emergency Mobile AdBlue Assistance. Additional emergency callout charge applies. Subject to availability.
AdBlue Delete and Removal enquiries in Hampshire start with checking your vehicle and symptoms. Send your registration, full postcode and dashboard warning to discuss the available options and whether a mobile visit to your home or workplace is suitable.

Experienced technicians providing dedicated AdBlue software services for diesel cars and vans.
We come directly to your home or workplace at an agreed time that suits you.
Convenient mobile appointments throughout the week, subject to availability.
Dedicated AdBlue software services, with your vehicle checked before booking.
Confidence in our work, backed by our lifetime AdBlue software warranty.
If we cannot successfully complete the agreed service, our No Fix, No Fee policy applies.
From helpful advice to professional automotive services, genuine customer feedback says more than any sales pitch. Take a look at the experiences shared by customers and see why so many drivers put their trust in experienced automotive specialists.
01Understanding the service
Mobile attendance depends on your location, vehicle, fault and access to a safe working area. Include your full postcode and whether the vehicle can start when enquiring. A roadside location or an immobilised vehicle may require recovery rather than an on-site repair; attendance and completion times need to be confirmed.
Enquiries are welcome from the listed Hampshire locations, including Southampton and Portsmouth. The postcode list is a guide, not a county boundary or a promise of attendance. SO, PO, RG, GU and SP are postcode areas, and some districts cross into neighbouring counties. Send your full postcode to confirm availability, including if your district is not listed.
These terms generally describe software changes intended to disable SCR dosing and associated fault monitoring. They do not necessarily involve removing hardware and do not restore a failed pump, sensor or catalyst. SCR faults can trigger warnings, reduced performance or restart inhibition, depending on the vehicle and fault. A countdown does not establish which component has failed, and the engine may still crank when restarting is inhibited. Vehicle identification and diagnosis are needed before discussing the scope or expected outcome of any work.
Repair starts with reading fault codes and checking relevant live data against the vehicle's test procedures. P20E8 means reductant pressure too low; possible causes require testing rather than assuming the tank or pump must be replaced. P2002 means diesel particulate filter efficiency below threshold, bank 1, and is not a specific SCR fault code. Depending on the diagnosis, repairs may involve wiring, leaks, dosing components, sensors or applicable software updates. Any reset or adaptation should follow the required repair procedure.
Some UK-market Ford Transit, Mercedes-Benz Sprinter, Audi, BMW, Volkswagen, Peugeot and Citroën diesel variants use AdBlue/SCR, but fitment varies by model, engine, production date and specification. Earlier versions and some later diesels may not have it. Certain Peugeot and Citroën applications use combined tank and pump assemblies, but a warning alone does not establish an assembly failure. Send your registration to check likely fitment and service compatibility; ECU identification or further vehicle details may also be required.
Use the enquiry form or WhatsApp contact option to send your registration, full postcode and a photograph of the warning. Include any fault codes, the displayed countdown, recent repairs or refills, and whether the engine starts. These details help establish the next diagnostic step. Ask for confirmation of appointment availability, the proposed work and what the quote includes before booking.
From booking to completion, our experienced mobile technicians make the process straightforward.
We confirm your vehicle, location, service and appointment.
On the day, your technician calls with an estimated arrival time.
We connect diagnostic equipment, check the vehicle and identify relevant faults.
We read the original ECU software, prepare the AdBlue modification and apply it.
Final diagnostics, applicable fault-code resets and checks to confirm the agreed work is complete.
We take payment, provide a receipt and explain the applicable software warranty.
02Why choose AdBlue Solutions
Found a fault code during a diagnostic scan? Enter it below to understand what it could mean, what warning signs to look out for and what information our mobile AdBlue specialists need to help you.
From AdBlue pressure faults to NOx sensor warnings and SCR system problems, explore common diagnostic codes in simple English.
8 common codes
Fault name
What it means
The system has reported insufficient reductant pressure. Diagnostic checks help establish the cause, rather than assuming a failed pump.
VIEW FAULT DETAILSFault name
What it means
SCR NOx reduction efficiency has been reported below its expected threshold. The full scan and sensor readings help identify possible causes.
VIEW FAULT DETAILSFault name
What it means
The code concerns SCR operation or monitoring. Read it alongside the full scan and vehicle-specific information.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a dosing or aftertreatment injector. Check the fitted system and full scan before assuming a cause.
VIEW FAULT DETAILSFault name
What it means
The system reports that the reductant level is too low. Check the actual fluid level and whether the reported level is accurate.
VIEW FAULT DETAILSFault name
What it means
The system has reported reductant quality performance. The code alone does not identify the cause.
VIEW FAULT DETAILSSend us your registration, postcode and diagnostic fault code. We'll check the details and explain the available mobile service options.
Customer questions
Still unsure? Send us your registration and a photo of the warning on WhatsApp.
Ask on WhatsAppAdBlue Delete refers to software changes intended to disable SCR dosing and associated monitoring. AdBlue Removal is often used for the same service, while AdBlue Repair and AdBlue Fix describe resolving faults. A delete does not repair failed components or address unrelated causes of limp mode or a non-start. Send your registration so the vehicle's specification can be checked.
AdBlue Removal usually means software deactivation of the SCR system rather than physical removal of the tank, injector or catalyst. The term alone does not define what work is included, so the proposed scope needs to be confirmed for your vehicle.
A delete disables aspects of SCR operation and monitoring. A repair aims to restore the system's function through diagnosis and, where needed, wiring repairs, component replacement or manufacturer-specified software updates and adaptations. Neither cost nor the dashboard message alone establishes which work is needed.
An AdBlue Fix means resolving the underlying fault. Checks may cover fluid quality, dosing pressure, leaks, wiring, injector operation and NOx sensor readings. Clearing codes or resetting a countdown is not a substitute for correcting the cause, and cleaning is not a general remedy for a failed NOx sensor.
Send your registration, full postcode, warning message and any diagnostic codes. Include whether the vehicle starts and whether a countdown is displayed. A registration helps narrow down the specification, but diagnostic identification may still be needed to confirm the ECU and SCR equipment.
Yes. Send a clear photograph of the warning and any scan results through the WhatsApp contact option. These help with initial assessment but do not confirm the failed component without diagnostic checks.
The time depends on the vehicle, fault and work required. Diagnosis, parts availability and any subsequent adaptations or testing can affect completion time. Send your registration and symptoms for an initial estimate; some repairs may need additional equipment or a follow-up visit.
It cannot be promised as a cure. Limp mode and non-start conditions can have SCR-related or unrelated causes, and some faults involve more than one control module. A diagnostic scan is needed before advising on the cause and likely outcome.
Yes. Our standard hours are Monday to Sunday, 8 AM to 8 PM. Emergency callouts are available 24 hours a day, 7 days a week, subject to location and availability. An additional emergency callout charge applies and is confirmed before dispatch.
Related
Enter your registration, postcode and mobile number. We'll check your vehicle and reply with a quotation. You can add a photo of your dashboard warning in the WhatsApp chat.
Call or WhatsApp with the warning, miles remaining and where the vehicle is. Emergency callouts carry an additional charge, confirmed before dispatch.