“Brilliant service, my car is running better than ever with no pesky adblue issues. Would highly recommend”
Turtle
Seeing an AdBlue warning or a restart countdown on your Audi A4 dashboard is a major concern. These faults can prevent the engine from starting, leaving you stranded. AdBlue Solutions offers a fully mobile, software-only AdBlue delete service to solve these issues at your home or workplace. For a no-obligation quote, please provide your vehicle registration and postcode.
We come to your home, workplace or another agreed safe location, subject to availability.
Is this on your dashboard?
A mobile appointment that fits around your day, with a vehicle suitability check and a quotation before you book.

Experienced technicians providing dedicated AdBlue software services for diesel cars and vans.
We come directly to your home or workplace at an agreed time that suits you.
Convenient mobile appointments throughout the week, subject to availability.
Dedicated AdBlue software services, with your vehicle checked before booking.
Confidence in our work, backed by our lifetime AdBlue software warranty.
If we cannot successfully complete the agreed service, our No Fix, No Fee policy applies.
From helpful advice to professional automotive services, genuine customer feedback says more than any sales pitch. Take a look at the experiences shared by customers and see why so many drivers put their trust in experienced automotive specialists.
Common AdBlue warnings
This is the most critical warning, indicating the car will not restart once the distance shown expires. It's triggered by a fault in the AdBlue system that needs urgent attention to avoid being immobilised.
A general warning, often accompanied by the engine light, pointing to a fault somewhere in the SCR system. The underlying cause could be a failed sensor, pump, or injector, which requires specialist diagnostics.
The system may believe the AdBlue is contaminated or does not meet the required standard, even if you have used the correct fluid. This is often caused by a faulty quality sensor within the AdBlue tank assembly.
Your A4 may report an incorrect fluid level or fail to register that you have topped up the tank. This is commonly due to a failure of the level sensor unit, which is part of the main tank assembly.
Nitrogen Oxide (NOx) sensors are critical for monitoring exhaust gases and ensuring the AdBlue system is effective. A fault with one of these sensors will trigger a system malfunction and can start a non-start countdown.
The AdBlue system has a heater to prevent the fluid from freezing and a pump to deliver it to the exhaust. If either of these components fails, the entire system will be disabled and a warning will appear.
AdBlue Delete & Removal
Our mobile service begins with a full diagnostic scan to confirm the AdBlue system faults. We then connect directly to your Audi A4's Engine Control Unit (ECU) to read its software. The AdBlue function is then professionally disabled in the software map; this is often called an AdBlue Delete or AdBlue Removal. Some newer A4 models have protected ECUs that require a specialist unlocking process, which carries an extra cost confirmed before any work begins. We also offer optional extras such as performance or economy remaps, which can be quoted for separately. All work is completed at your location for your convenience.
Vehicle suitability
Does my Audi A4 have AdBlue? AdBlue fitment varies across the diesel A4 range; we check the individual vehicle rather than relying on an assumed production-year boundary. Its presence depends heavily on the specific engine, the car's age, and the emissions standard it was designed to meet. Petrol A4 models do not use AdBlue. Check your vehicle's handbook for the AdBlue filler location; it is not the same on every version. The definitive way to know is by providing us with your vehicle registration, which allows us to confirm your A4's exact specification.
Found a fault code during a diagnostic scan? Enter it below to understand what it could mean, what warning signs to look out for and what information our mobile AdBlue specialists need to help you.
From AdBlue pressure faults to NOx sensor warnings and SCR system problems, explore common diagnostic codes in simple English.
These are shared diagnostic codes, not confirmed faults for every Audi A4. Applicability depends on your vehicle and scan results.
8 common codes
Fault name
What it means
The system has reported insufficient reductant pressure. Diagnostic checks help establish the cause, rather than assuming a failed pump.
VIEW FAULT DETAILSFault name
What it means
SCR NOx reduction efficiency has been reported below its expected threshold. The full scan and sensor readings help identify possible causes.
VIEW FAULT DETAILSFault name
What it means
The code concerns SCR operation or monitoring. Read it alongside the full scan and vehicle-specific information.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a dosing or aftertreatment injector. Check the fitted system and full scan before assuming a cause.
VIEW FAULT DETAILSFault name
What it means
The system reports that the reductant level is too low. Check the actual fluid level and whether the reported level is accurate.
VIEW FAULT DETAILSFault name
What it means
The system has reported reductant quality performance. The code alone does not identify the cause.
VIEW FAULT DETAILSSend us your registration, postcode and diagnostic fault code. We'll check the details and explain the available mobile service options.
We cover much of Southern England and other supported areas across England. Enter your postcode, or browse our areas.
Tell us the registration, your postcode and what the dashboard shows.
We confirm suitability for your model and agree a quotation before any work.
Choose a time and a safe place to work, at home or at work, subject to availability.
The agreed software work is carried out at your location and checked before we leave.
This usually indicates a fault within the system, not just an empty tank. The warning persists because the car has detected a problem with a component like a sensor, pump, or heater, which a simple top up will not fix.
Yes, our AdBlue delete software solution is specifically designed to disable the countdown timer and clear the associated warnings from the dashboard. The aim is to stop the system from enforcing the no-start restriction.
Whether unlocking is needed depends on your Audi A4's specific ECU hardware and software. Some supported protected ECUs need specialist unlocking, which costs extra and is confirmed before booking; the vehicle's age alone does not establish this.
No, not all of them. While it's very common on modern diesel A4s, its fitment depends on the engine, model year, and original emissions specification. We use your registration to confirm if your specific car has an AdBlue system.
SCR stands for Selective Catalytic Reduction, which is the technical name for the AdBlue system. NOx (Nitrogen Oxide) sensors are key components that measure exhaust emissions. A fault with either will trigger the AdBlue warning light and a non-start countdown.
Yes, absolutely. We work on many high-mileage and company-owned A4s. Our mobile service is ideal for busy drivers as it minimises vehicle downtime and eliminates the recurring risk of AdBlue system failures.
For most Audi A4 models, the entire process takes between one to two hours at your location. If your vehicle's ECU requires unlocking, it may take longer, but this will be explained when we provide your quote.
We are a mobile service covering a wide area, including London, Heathrow, the wider South East, and into England. We come to your home or place of work, so you do not need to travel to us.
The price varies based on the car's age, engine, and specific ECU type. For an accurate, no-obligation quote tailored to your vehicle, please provide us with your registration number and postcode.
No, they are just two different names for the exact same service. Both terms refer to our process of rewriting the engine's ECU software to disable the AdBlue system.
Yes. Our standard hours are Monday to Sunday, 8 AM to 8 PM. Emergency callouts are available 24 hours a day, 7 days a week, subject to location and availability. An additional emergency callout charge applies and is confirmed before dispatch.
Enter your registration, postcode and mobile number. We'll check your vehicle and reply with a quotation. You can add a photo of your dashboard warning in the WhatsApp chat.
Call or WhatsApp with the warning, miles remaining and where the vehicle is. Emergency callouts carry an additional charge, confirmed before dispatch.
Related pages