“Brilliant service, my car is running better than ever with no pesky adblue issues. Would highly recommend”
Turtle
AdBlue Countdown Fix services are essential if your dashboard is displaying a 'No Start in...' warning that is slowly ticking down your remaining mileage. We provide a mobile response to resolve these software and hardware failures at your home, workplace, or at the roadside.
24/7 Emergency Callouts Available
Emergency Mobile AdBlue Assistance. Additional emergency callout charge applies. Subject to availability.
AdBlue Countdown Fix services are essential if your dashboard is displaying a 'No Start in...' warning that is slowly ticking down your remaining mileage. We provide a mobile response to resolve these software and hardware failures at your home, workplace, or at the roadside.

Experienced technicians providing dedicated AdBlue software services for diesel cars and vans.
We come directly to your home or workplace at an agreed time that suits you.
Convenient mobile appointments throughout the week, subject to availability.
Dedicated AdBlue software services, with your vehicle checked before booking.
Confidence in our work, backed by our lifetime AdBlue software warranty.
If we cannot successfully complete the agreed service, our No Fix, No Fee policy applies.
From helpful advice to professional automotive services, genuine customer feedback says more than any sales pitch. Take a look at the experiences shared by customers and see why so many drivers put their trust in experienced automotive specialists.
01Understanding the service
A 'No Start' countdown warning requires an urgent fix before your vehicle is immobilised. This fault, often showing as 'Starter Inhibited', can count down from as little as 500 miles, after which the engine will not restart. It's particularly common on vehicles from PSA Peugeot Citroën, VAG, and Mercedes-Benz, and is frequently caused by a failure in the SCR system, such as a faulty pump, heater, or NOx sensor.
For many vehicle owners, an AdBlue Delete or AdBlue Removal is the most reliable and cost-effective way to handle recurring SCR system failures. Rather than spending a significant amount on a new AdBlue tank or injector that may fail again, this service involves recalibrating the Engine Control Unit (ECU) to bypass the SCR system. If you prefer to restore factory functionality, we also offer AdBlue Delete and Removal service using diagnostic checks. An AdBlue Delete, however, eliminates the mechanical weak points that commonly plague modern diesel engines.
AdBlue faults are prevalent across a wide range of diesel cars and vans. We can see these issues on the Citroën Berlingo and Dispatch, Peugeot 3008 and Partner, as well as the Audi A4, A6, and Q5 models. Symptoms typically start with an UREA warning light, an Engine Management Light (EML), or a specific message stating 'AdBlue System Fault'. On many versions of the Ford Transit (EcoBlue engines) and Land Rover Discovery/Range Rover Sport, the countdown can appear suddenly even if the tank is full. Because software versions vary significantly by year, we ask you to provide your registration so we can confirm the exact technical approach for your specific vehicle.
To book one of our mobile technicians for an AdBlue Delete and Removal, please contact us with your vehicle registration and postcode. This allows us to confirm compatibility and provide an accurate quote. For the fastest diagnosis, you can also send a photo of any dashboard warnings or fault codes via WhatsApp. We can then ensure the correct software is prepared for an efficient service at your home or workplace.
General garages often lack the specialist equipment required for advanced AdBlue software work and ECU recalibration. Their only option may be to replace expensive components like NOx sensors or the entire AdBlue tank. Our mobile service focuses specifically on the electronic control of the SCR system. We aim for a rapid response to get you back on the road as quickly as possible.
From booking to completion, our experienced mobile technicians make the process straightforward.
We confirm your vehicle, location, service and appointment.
On the day, your technician calls with an estimated arrival time.
We connect diagnostic equipment, check the vehicle and identify relevant faults.
We read the original ECU software, prepare the AdBlue modification and apply it.
Final diagnostics, applicable fault-code resets and checks to confirm the agreed work is complete.
We take payment, provide a receipt and explain the applicable software warranty.
02Why choose AdBlue Solutions
Found a fault code during a diagnostic scan? Enter it below to understand what it could mean, what warning signs to look out for and what information our mobile AdBlue specialists need to help you.
From AdBlue pressure faults to NOx sensor warnings and SCR system problems, explore common diagnostic codes in simple English.
8 common codes
Fault name
What it means
The system has reported insufficient reductant pressure. Diagnostic checks help establish the cause, rather than assuming a failed pump.
VIEW FAULT DETAILSFault name
What it means
SCR NOx reduction efficiency has been reported below its expected threshold. The full scan and sensor readings help identify possible causes.
VIEW FAULT DETAILSFault name
What it means
The code concerns SCR operation or monitoring. Read it alongside the full scan and vehicle-specific information.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a dosing or aftertreatment injector. Check the fitted system and full scan before assuming a cause.
VIEW FAULT DETAILSFault name
What it means
The system reports that the reductant level is too low. Check the actual fluid level and whether the reported level is accurate.
VIEW FAULT DETAILSFault name
What it means
The system has reported reductant quality performance. The code alone does not identify the cause.
VIEW FAULT DETAILSSend us your registration, postcode and diagnostic fault code. We'll check the details and explain the available mobile service options.
Whether you've already topped up the tank, had parts replaced or are seeing a countdown on your dashboard, our team can check your vehicle and discuss the available service options. Speak to us before spending more money guessing at the cause.
Customer questions
Still unsure? Send us your registration and a photo of the warning on WhatsApp.
Ask on WhatsAppAn AdBlue Delete is a software-based service where the vehicle's Engine Control Unit (ECU) is reprogrammed to stop monitoring the Selective Catalytic Reduction (SCR) system. This stops the car from looking for AdBlue fluid levels or sensor data, effectively preventing any future AdBlue-related breakdowns or 'No Start' countdowns from occurring.
AdBlue Removal is another term for an AdBlue Delete. It involves the electronic removal of the SCR system's influence over the engine's management software. This ensures that even if mechanical components like the pump or sensors are physically damaged, the vehicle will continue to run normally without warning lights or power restrictions.
An AdBlue Repair usually involves replacing physical parts like a NOx sensor or injector to restore the system to factory settings. An AdBlue Delete is a software modification that bypasses these parts entirely.
An AdBlue Fix is a general term for any service that resolves a dashboard warning or countdown. Depending on the vehicle's age and the specific fault codes present, this could be a software reset, a sensor recalibration, or a full system delete to ensure the engine remains operational.
To give you an accurate price, we need your vehicle registration number and your current postcode. The registration allows us to check the ECU type and engine version, while the postcode helps us calculate the arrival time for our mobile technician to reach your home or workplace.
Yes, we highly recommend sending a clear photo of your dashboard warnings and any specific fault codes you have via WhatsApp. This helps our specialist technicians diagnose the exact nature of the failure before they arrive, ensuring they have the correct software tools ready for your specific model.
Most mobile AdBlue Fix or Delete services take between 45 and 90 minutes. Our technician will connect to your vehicle's OBD port, perform a full diagnostic scan, and then carry out the necessary software recalibration. You are usually back on the road immediately after the service is completed.
Yes, once our AdBlue Fix software is applied and the fault codes are cleared, the 'No Start' countdown will disappear from your dashboard. The vehicle's ECU will be updated to show a full range or a neutral status, allowing the engine to start and run without any further interruptions.
We provide AdBlue Removal and AdBlue Delete and Removal service for a wide range of vehicles, including passenger cars, small vans like the VW Caddy, and larger commercial vehicles like the Mercedes Sprinter. Please send your registration details so we can confirm the software compatibility for your specific van or HGV model.
Yes. Our standard hours are Monday to Sunday, 8 AM to 8 PM. Emergency callouts are available 24 hours a day, 7 days a week, subject to location and availability. An additional emergency callout charge applies and is confirmed before dispatch.
From the initial booking and diagnostic checks to the agreed software work, final checks and receipt, we'll explain the process clearly. Tell us your vehicle and location, and we'll take it from there.
Related
Enter your registration, postcode and mobile number. We'll check your vehicle and reply with a quotation. You can add a photo of your dashboard warning in the WhatsApp chat.
Call or WhatsApp with the warning, miles remaining and where the vehicle is. Emergency callouts carry an additional charge, confirmed before dispatch.