“Brilliant service, my car is running better than ever with no pesky adblue issues. Would highly recommend”
Turtle
Get a quote for our specialist AdBlue Delete and mobile repair services delivered directly to your home, workplace, or the roadside. If you have found this page, we are local to you and ready to resolve your vehicle's countdown timer or warning lights today.
24/7 Emergency Callouts Available
Emergency Mobile AdBlue Assistance. Additional emergency callout charge applies. Subject to availability.
Get a quote for our specialist AdBlue Delete and mobile repair services delivered directly to your home, workplace, or the roadside. If you have found this page, we are local to you and ready to resolve your vehicle's countdown timer or warning lights today.

Experienced technicians providing dedicated AdBlue software services for diesel cars and vans.
We come directly to your home or workplace at an agreed time that suits you.
Convenient mobile appointments throughout the week, subject to availability.
Dedicated AdBlue software services, with your vehicle checked before booking.
Confidence in our work, backed by our lifetime AdBlue software warranty.
If we cannot successfully complete the agreed service, our No Fix, No Fee policy applies.
From helpful advice to professional automotive services, genuine customer feedback says more than any sales pitch. Take a look at the experiences shared by customers and see why so many drivers put their trust in experienced automotive specialists.
01Understanding the service
An AdBlue Delete is often the most requested service for drivers facing persistent SCR system failures. By reconfiguring the Engine Control Unit (ECU), we can effectively bypass the requirement for the fluid, ensuring the vehicle no longer enters limp mode or refuses to start due to chemical quality or component errors. Because we operate as a mobile service, we perform the software recalibration wherever your vehicle is parked, saving you the expense of recovery to a workshop.
AdBlue Removal involves a combination of software adjustment and, where necessary, the deactivation of specific hardware components like the dosing valve or the NOx sensors. This process ensures that the engine management system no longer monitors the Selective Catalytic Reduction (SCR) tank levels or fluid quality. If your vehicle is displaying 'No Start in XXX Miles', this service provides a rapid resolution. By opting for a professional removal, you avoid the high costs associated with replacing expensive hardware that is prone to failure in cold weather or due to crystallisation within the narrow delivery lines.
For those seeking an AdBlue Repair, we provide comprehensive mobile diagnostics to identify the exact point of failure within the SCR system. Faults can commonly occur within the delivery lines, the injector nozzle, or the heating elements inside the tank. On many versions of modern diesel engines, these components are integrated into the tank assembly, making traditional fixes expensive. We use professional diagnostic tools to read the specific fault codes stored in your vehicle's memory. This allows us to provide a targeted fix, whether it involves cleaning a blocked injector or replacing a specific sensor that has reached the end of its service life.
Choosing the correct AdBlue Fix depends entirely on the specific symptoms your vehicle is displaying and your long-term goals for the car or van. Common fault codes such as P20E8 (reductant pressure too low) or P20EE (SCR NOx Catalyst Efficiency Below Threshold) can indicate a failing AdBlue system. Our technicians can advise on whether a software-based fix or a mechanical repair is the best route for your specific make and model. To get started, we simply require your vehicle registration and a brief description of the symbols appearing on your instrument cluster.
Ready to resolve your AdBlue issue? To get a precise quote, please use our form or contact us with your vehicle registration and postcode. Sending a photo of the dashboard warning lights can also help our technicians make a preliminary assessment. This information allows us to identify your vehicle's specific SCR system and provide an accurate price for an AdBlue Delete, Removal, Repair, or Fix at your location.
From booking to completion, our experienced mobile technicians make the process straightforward.
We confirm your vehicle, location, service and appointment.
On the day, your technician calls with an estimated arrival time.
We connect diagnostic equipment, check the vehicle and identify relevant faults.
We read the original ECU software, prepare the AdBlue modification and apply it.
Final diagnostics, applicable fault-code resets and checks to confirm the agreed work is complete.
We take payment, provide a receipt and explain the applicable software warranty.
02Why choose AdBlue Solutions
Found a fault code during a diagnostic scan? Enter it below to understand what it could mean, what warning signs to look out for and what information our mobile AdBlue specialists need to help you.
From AdBlue pressure faults to NOx sensor warnings and SCR system problems, explore common diagnostic codes in simple English.
8 common codes
Fault name
What it means
The system has reported insufficient reductant pressure. Diagnostic checks help establish the cause, rather than assuming a failed pump.
VIEW FAULT DETAILSFault name
What it means
SCR NOx reduction efficiency has been reported below its expected threshold. The full scan and sensor readings help identify possible causes.
VIEW FAULT DETAILSFault name
What it means
The code concerns SCR operation or monitoring. Read it alongside the full scan and vehicle-specific information.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a dosing or aftertreatment injector. Check the fitted system and full scan before assuming a cause.
VIEW FAULT DETAILSFault name
What it means
The system reports that the reductant level is too low. Check the actual fluid level and whether the reported level is accurate.
VIEW FAULT DETAILSFault name
What it means
The system has reported reductant quality performance. The code alone does not identify the cause.
VIEW FAULT DETAILSSend us your registration, postcode and diagnostic fault code. We'll check the details and explain the available mobile service options.
Customer questions
Still unsure? Send us your registration and a photo of the warning on WhatsApp.
Ask on WhatsAppAn AdBlue Delete is a software-based solution where we reprogram the vehicle's engine management system to stop looking for SCR data. This prevents the car from entering limp mode or displaying countdown timers when sensors or pumps fail.
AdBlue Removal refers to the process of electronically disabling the Selective Catalytic Reduction system. This ensures the vehicle no longer requires AdBlue fluid to operate and will not trigger fault codes related to fluid quality, tank levels, or heater failures. Our mobile technicians perform this via the OBD port or directly at the ECU level.
An AdBlue Repair involves identifying and replacing a faulty physical component, such as a NOx sensor or pump, to keep the system functioning as originally intended. An AdBlue Delete is a software modification that bypasses the system entirely, removing the need for future repairs or fluid refills by instructing the ECU to ignore the SCR system.
An AdBlue Fix is a general term for any service that resolves a dashboard warning or 'No Start' condition related to the exhaust additive system. This could range from software recalibration to the cleaning of a crystallised injector nozzle. The specific fix required depends on the fault codes currently stored in your engine's computer.
We require your full vehicle registration number so we can identify the specific engine code and SCR system version, as these vary by year and manufacturer. We also need your postcode to calculate the arrival time for our mobile technician, as we travel to your home or workplace to carry out the work.
Yes, we encourage customers to send a photo of their dashboard and any specific error messages via WhatsApp. This helps our specialist technicians confirm the severity of the fault, such as a definitive mileage countdown, allowing us to provide a more accurate diagnostic assessment and quote before we even arrive at your location.
Yes. Our standard hours are Monday to Sunday, 8 AM to 8 PM. Emergency callouts are available 24 hours a day, 7 days a week, subject to location and availability. An additional emergency callout charge applies and is confirmed before dispatch.
Related
Enter your registration, postcode and mobile number. We'll check your vehicle and reply with a quotation. You can add a photo of your dashboard warning in the WhatsApp chat.
Call or WhatsApp with the warning, miles remaining and where the vehicle is. Emergency callouts carry an additional charge, confirmed before dispatch.