“Brilliant service, my car is running better than ever with no pesky adblue issues. Would highly recommend”
Turtle
An AdBlue Heater Fault is a frequent cause of 'Non-Start' countdowns, often triggered when the internal heating element within the AdBlue tank or delivery line fails.
24/7 Emergency Callouts Available
Emergency Mobile AdBlue Assistance. Additional emergency callout charge applies. Subject to availability.
An AdBlue Heater Fault is a frequent cause of 'Non-Start' countdowns, often triggered when the internal heating element within the AdBlue tank or delivery line fails.

Experienced technicians providing dedicated AdBlue software services for diesel cars and vans.
We come directly to your home or workplace at an agreed time that suits you.
Convenient mobile appointments throughout the week, subject to availability.
Dedicated AdBlue software services, with your vehicle checked before booking.
Confidence in our work, backed by our lifetime AdBlue software warranty.
If we cannot successfully complete the agreed service, our No Fix, No Fee policy applies.
From helpful advice to professional automotive services, genuine customer feedback says more than any sales pitch. Take a look at the experiences shared by customers and see why so many drivers put their trust in experienced automotive specialists.
01Understanding the service
AdBlue solution freezes at -11°C, so manufacturers fit heating elements in the tank and lines. These components are prone to electrical failure, which typically requires a complete and expensive tank replacement at a garage. Our mobile service offers a definitive AdBlue Delete or AdBlue Removal, which bypasses the software requirement for these heaters to function. By choosing this AdBlue Fix over a component replacement, you eliminate the risk of the same part failing again. We provide a comprehensive software fix that addresses the root cause in the ECU, ensuring your vehicle remains operational without the threat of a countdown.
On many modern diesel vehicles, the first sign of an AdBlue Heater Fault is a dashboard warning light, often with an engine management lamp. You may have fault codes such as P20BD or P20B9, which point to the reductant heater control circuit. Because the system is integrated, a single heater fault can lead the ECU to condemn the entire SCR system. Our AdBlue Delete service resolves these software triggers. To confirm the correct solution for your vehicle, please send your registration so we can identify the engine and system type.
Our mobile service is designed for your convenience. A technician will travel to your location, equipped with specialist tools to interface directly with your vehicle's Engine Control Unit (ECU) via the OBD port. They will read the existing software, apply our AdBlue Delete calibration to disable the heater monitoring, and clear all related fault codes. This whole process typically takes between 45 and 90 minutes and saves you the time and expense of recovering the vehicle to a workshop.
AdBlue systems vary significantly between manufacturers. While many PSA, VAG, and BMW group vehicles suffer from heater failures, the exact protocol for an AdBlue Delete depends on the ECU type. To provide an accurate quote and confirm we can perform the AdBlue Removal for your vehicle, we need your full registration and current postcode. We also recommend sending a photo of your dashboard warnings via WhatsApp, as this allows our technicians to verify the fault and provide the most accurate advice.
Booking your mobile AdBlue Fix is straightforward. Once you provide your vehicle details and location, we can give you a quote for the AdBlue Delete. If you wish to proceed, we dispatch a technician to you. Whether at home or work, our specialist will perform the AdBlue Removal via the diagnostic port. This process typically takes between 45 and 90 minutes, clearing the 'Non-Start' warnings and getting you back on the road without the need for a garage visit.
From booking to completion, our experienced mobile technicians make the process straightforward.
We confirm your vehicle, location, service and appointment.
On the day, your technician calls with an estimated arrival time.
We connect diagnostic equipment, check the vehicle and identify relevant faults.
We read the original ECU software, prepare the AdBlue modification and apply it.
Final diagnostics, applicable fault-code resets and checks to confirm the agreed work is complete.
We take payment, provide a receipt and explain the applicable software warranty.
02Why choose AdBlue Solutions
Found a fault code during a diagnostic scan? Enter it below to understand what it could mean, what warning signs to look out for and what information our mobile AdBlue specialists need to help you.
From AdBlue pressure faults to NOx sensor warnings and SCR system problems, explore common diagnostic codes in simple English.
8 common codes
Fault name
What it means
The system has reported insufficient reductant pressure. Diagnostic checks help establish the cause, rather than assuming a failed pump.
VIEW FAULT DETAILSFault name
What it means
SCR NOx reduction efficiency has been reported below its expected threshold. The full scan and sensor readings help identify possible causes.
VIEW FAULT DETAILSFault name
What it means
The code concerns SCR operation or monitoring. Read it alongside the full scan and vehicle-specific information.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a NOx sensor circuit or signal. It does not alone confirm which part needs attention.
VIEW FAULT DETAILSFault name
What it means
The code concerns a dosing or aftertreatment injector. Check the fitted system and full scan before assuming a cause.
VIEW FAULT DETAILSFault name
What it means
The system reports that the reductant level is too low. Check the actual fluid level and whether the reported level is accurate.
VIEW FAULT DETAILSFault name
What it means
The system has reported reductant quality performance. The code alone does not identify the cause.
VIEW FAULT DETAILSSend us your registration, postcode and diagnostic fault code. We'll check the details and explain the available mobile service options.
Whether you've already topped up the tank, had parts replaced or are seeing a countdown on your dashboard, our team can check your vehicle and discuss the available service options. Speak to us before spending more money guessing at the cause.
Customer questions
Still unsure? Send us your registration and a photo of the warning on WhatsApp.
Ask on WhatsAppAdBlue Delete is a software-based service where we reprogram your vehicle's Engine Control Unit (ECU).
AdBlue Removal is another term for the software deletion of the Selective Catalytic Reduction (SCR) system. It involves adjusting the vehicle's firmware so that the AdBlue injection process is stopped, and all associated dashboard warnings and countdown timers are removed.
AdBlue Repair refers to fixing the hardware, such as replacing a failed heater or pump. In contrast, an AdBlue Delete is a software solution that removes the need for those parts to function.
An AdBlue Fix is a general term for resolving an SCR system error. This could be a software AdBlue Delete to bypass a failed component, or a diagnostic service to identify why the system has entered a 'non-start' countdown mode.
We require your vehicle's registration (VRM) to identify the specific engine and ECU type, along with your postcode to confirm you are within our mobile service area. This ensures we provide an accurate quote and send a technician with the correct tools for your AdBlue Fix.
Yes, we encourage you to send a photo of your dashboard warning lights and any fault codes you have via WhatsApp. This helps our specialist technicians confirm that an AdBlue Heater Fault is the likely issue and provide the most accurate advice for an AdBlue Removal.
Yes, we are a fully mobile specialist service. We come to your home, workplace, or the roadside. Our technicians carry all the necessary equipment to perform an AdBlue Delete or AdBlue Fix on-site, usually taking between 45 and 90 minutes.
The opposite is true. An AdBlue Heater Fault will eventually trigger a countdown that prevents the engine from starting. An AdBlue Delete removes this restriction, ensuring your car or van starts reliably without the system software blocking the ignition.
On most vehicles, a mobile AdBlue Removal takes between 45 and 90 minutes. Our technician will connect to your vehicle's OBD port, read the ECU data, apply the AdBlue Delete software modification, and then perform a full diagnostic check and fault code clear.
Yes. Our standard hours are Monday to Sunday, 8 AM to 8 PM. Emergency callouts are available 24 hours a day, 7 days a week, subject to location and availability. An additional emergency callout charge applies and is confirmed before dispatch.
From the initial booking and diagnostic checks to the agreed software work, final checks and receipt, we'll explain the process clearly. Tell us your vehicle and location, and we'll take it from there.
Related
Enter your registration, postcode and mobile number. We'll check your vehicle and reply with a quotation. You can add a photo of your dashboard warning in the WhatsApp chat.
Call or WhatsApp with the warning, miles remaining and where the vehicle is. Emergency callouts carry an additional charge, confirmed before dispatch.